Load, height and slew · Network Rail approved

Series 2LHS Evo

Advanced height, slew and load control with Network Rail approval for high performance working.

A Rated Capacity Indicator that monitors and controls the working height, slew and load capacity of the machine. It is fully approved by Network Rail as a high performance Movement Limiting Device for Adjacent Line Open (ALO) and Overhead Line Equipment (OLE) work.

Not sure which system you need? Use our System Finder
GKD Series 2LHS Evo display unit

Load, height, slew

Monitored and controlled in one system

Up to 36

Pre-defined lifting zones for the most efficient use of the machine

Network Rail

High performance approval

Crane Mode

Reduces load swing for a stable, controlled lift

New for 2025

Smoother stops. Steadier lifts.

The Series 2 Evo upgrade, launched in September 2025, adds a powerful new set of features as standard.

NEW · CONTROL

True proportional control

A first for the UK civils market. Advanced software brings the machine to a completely smooth stop at the pre-set limit, rather than a step down or on/off valve set up.

NEW · LIFTING

Multiple lift duties

The system calculates multiple lift duties around the machine, so operators can safely lift different amounts depending on boom position.

NEW · CRANE MODE

Reduced load swing

When activated, Crane Mode uses pre-determined settings to automatically slow slew movement to a smooth stop, keeping the lift stable and controlled throughout.

NEW · DATA

Telemetry ready

Series 2 Evo connects to our online Insights Platform for real-time data on machine utilisation, operator behaviour and key safety events.

How it works

Know the load. Stay inside the limits.

The Series 2LHS Evo uses dedicated, high accuracy sensors and GKD safety software. It gives visual and audible warnings as limits are approached. It anticipates movement, so motion cuts are applied before a pre-set limit is breached.

01 · SENSE

Load, height and slew sensors

Gravity angle sensors, slew sensors and a pressure transducer track the boom, the slew position and the load on the hook.

02 · ALERT

Touchscreen and alarms

The touchscreen shows the load on the hook, available lift capacity, tool height and radius, and slew position. An external audible alarm sounds as the machine nears a limit.

03 · LIMIT

Intelligent motion cut

The intelligent motion cut stops the machine at the limit and only allows safe movement. True proportional control brings it to a completely smooth stop, rather than a step down or on/off cut.

Where it works

Built for lifting where load, height and slew all matter

Machine types

  • Tracked excavators
  • Wheeled excavators
  • Backhoe loaders
  • Other articulated boom machines
  • Multi-section, swing and offset booms

Sectors

  • Rail (ALO and OLE work)
  • Construction
  • Energy
  • Forestry
  • Mining

Typical work

  • Lifting at any boom extension and slew position, within the safe load
  • Adjacent Line Open (ALO) work, up to 300mm from the rail running edge
  • Overhead Line Equipment (OLE) work
  • Confined sites, or work close to open traffic lanes

Technical specifications

Series 2LHS Evo specification

Taken from the Series 2LHS Evo product page and GKD Series 2 product literature. If you need more detail for your machine, our team can help.

Control
Motion cutIncluded as standard. Compatible with 12V or 24V coils
SensorsGravity angle sensors (IP67), proximity based slew sensors, pressure transducer (IP67)
Proportional controlTrue proportional control as standard, for a completely smooth stop at the pre-set limit
Data loggingReal-time logging of system and limit settings, operation and events
TelemetryTelemetry ready, with data sent to our online Insights Platform
Load monitoring
Capacity indicationLoad on hook, available lift capacity and approach to maximum safe working load
LiftingMaximum safe load at any boom extension and slew position, with up to 36 pre-defined lifting zones
Lift dutiesMultiple lift duties calculated around the machine, based on boom position
Crane ModeAutomatically slows slew movement to a smooth stop, to reduce load swing
Display
Type14.5cm full colour LCD touch screen, IP67 rated. Easy to read in all light conditions
Functions
Virtual wallsParallel or multipoint, for full envelope control
Dig modeDig mode with dig depth indication
DiagnosticsIntegrated diagnostics, with fault codes shown on screen
Key switchesSupervisor key switch to lock limits. Disable key switch to turn the system off when not required
Certification
Network RailFully approved as a high performance Movement Limiting Device for ALO and OLE work, up to 300mm from the rail running edge
Series 2 touchscreen and an illustration of the working envelope around an excavator

The Series 2 touchscreen, and an illustration of the working envelope it controls around the machine.

Compatibility

Fits a wide range of machines

In its basic form the Series 2LHS Evo is a load indicator. Height and slew monitoring can be added, and the intelligent motion cut comes as standard.

  • Tracked or wheeled excavators, backhoe loaders and other articulated boom machines
  • Multiple boom configurations, including multi-section, swing and offset
  • Machines with pilot or electro hydraulic control systems
  • Available as load only, load and height, load and slew, or full load, height and slew
  • Intelligent motion cut as standard
  • Need height and slew control only? See the Series 2HS Evo

Installation and support

Fitted, set up and supported

Our engineers and approved partners fit the Series 2LHS Evo, set it up and show your operators how it works. With a global network of installers and service partners, expert support is never far away.

01

Fit

The sensors, touchscreen and motion cut are fitted to the machine.

02

Set up

The system is calibrated to the machine, and the limits and virtual walls are configured.

03

Train

Operators are shown how to read the display, set limits and use dig mode. The supervisor key switch keeps the limits secure.

04

Inspect

Book an annual inspection with us to keep the system working as it should.

Talk to us about the Series 2LHS Evo

Tell us about your machines and the lifting they do, and we will help you choose the right system. Call +44 (0) 1202 861961 or send us a message.

Send us a message

Fill in your details and our team will get back to you.

FAQ

Series 2LHS Evo questions

What is the difference between the Series 2HS Evo and Series 2LHS Evo?

The Series 2HS Evo controls height and slew. The Series 2LHS Evo adds load monitoring, so it suits machines doing lifting work.

Is the Series 2LHS Evo a Rated Capacity Indicator?

Yes. It monitors the load being lifted and makes sure the maximum safe load can be lifted at any boom extension and slew position.

Can it run virtual walls and load monitoring at the same time?

Yes. The Series 2LHS Evo combines envelope control and rated capacity indication in one system.

What does proportional control do?

It brings the machine to a completely smooth stop at the pre-set limit, rather than the step down or on/off stop of a standard valve set up. True proportional control comes as standard with the Evo upgrade.

Can operators override the limits?

No. The integrated supervisor key switch lets limits be set and not overridden. A separate disable key switch turns the system off when it is not needed.

Downloads

Series 2 Evo brochure

Download the Series 2 Evo brochure for an overview of the Series 2LHS Evo and its specification.

Other civils products

Compare with the rest of the range

Series 2HS Evo touchscreen with height and slew limits around an excavator

Combined function · Rail certified

Series 2HS Evo

Advanced height and slew control with Network Rail approval.

View product →
Series 1L load monitor system

Single function

Series 1L

Protection against reaching maximum lift capacity and overloads.

View product →
Series 1H height limiter system

Single function

Series 1H

Height limitation to protect from overhead obstacles or danger.

View product →