Height and slew · Network Rail approved
Advanced height and slew control with Network Rail approval.
A height and slew monitoring system for excavators, backhoe loaders and other articulated boom machines. It is fully approved by Network Rail as a low and high performance Movement Limiting Device for Adjacent Line Open (ALO) and Overhead Line Equipment (OLE) work.
Not sure which system you need? Use our System Finder
Height and slew
Monitored and controlled in one system
True proportional
A completely smooth stop at the pre-set limit
Network Rail
Low and high performance approval
Touchscreen
Full colour graphical display
New for 2025
The Series 2 Evo upgrade, launched in September 2025, adds a powerful new set of features as standard.
NEW · CONTROL
A first for the UK civils market. Advanced software brings the machine to a completely smooth stop at the pre-set limit, rather than a step down or on/off valve set up.
NEW · DATA
Series 2 Evo connects to our online Insights Platform for real-time data on machine utilisation, operator behaviour and key safety events.
NEW · LIFTING
The Series 2LHS Evo adds load control, with multiple lift duties around the machine and a new Crane Mode that reduces load swing.
How it works
The Series 2HS Evo uses high accuracy sensors and GKD safety software to track the height and slew of the machine. It warns the operator as the machine nears a set limit, and the motion cut stops the limit being breached.
01 · SENSE
Dedicated sensors track tool height, radius and slew position. Dig mode adds dig depth indication for work below ground.
02 · ALERT
A full colour touchscreen shows the limits set and where the machine is. The operator is warned as the machine approaches a limit. An external audio alarm sounds when the limit is reached.
03 · LIMIT
The intelligent motion cut comes as standard and prevents limits being breached. True proportional control brings the machine to a completely smooth stop at the limit. A remote hydraulic shut-off and a steering lock are also available.
Where it works
Technical specifications
Taken from the Series 2HS Evo product page. If you need more detail for your machine, our team can help.
| Control | |
|---|---|
| Motion cut | Intelligent motion cut as standard |
| Proportional control | True proportional control as standard, for a completely smooth stop at the pre-set limit |
| Limits | Height and slew limits, dialled in or set manually |
| Outputs | External audio alarm at the limit. Remote hydraulic shut-off and steering lock available |
| Data logging | Real-time data logging |
| Telemetry | Telemetry ready, with data sent to our online Insights Platform |
| Display | |
| Type | 14.5cm full colour touch screen, IP67 rated |
| Shows | Tool height and radius, slew position in degrees, limits set and motion cuts applied |
| Functions | |
| Virtual walls | Parallel or multipoint |
| Dig mode | Dig mode with dig depth indication |
| Diagnostics | Integrated diagnostics |
| Certification | |
| Network Rail | Fully approved as a low and high performance Movement Limiting Device for ALO and OLE work, up to 300mm from the rail running edge |
Compatibility
The Series 2HS Evo is a complete system, with its own sensors and touchscreen display. It suits tracked and wheeled machines with an articulated boom.
Installation and support
Our engineers and approved partners fit the Series 2HS Evo, set it up and show your operators how it works. Support does not stop at the install.
The sensors, touchscreen and motion cut are fitted to the machine, along with a shut-off or steering lock if you choose them.
The system is calibrated to the machine and the virtual walls are configured.
Operators are shown how to set limits, use dig mode and read the display.
Book an annual inspection with us to keep the system working as it should.
Tell us about your machines and where they work, and we will help you choose the right system. Call +44 (0) 1202 861961 or send us a message.
FAQ
It is fully approved by Network Rail as a low and high performance Movement Limiting Device. It can be used up to 300mm from the rail running edge.
Virtual walls keep the boom inside a safe working area that you set. You can use parallel or multipoint walls. They help when working in confined spaces or close to open traffic lanes.
Yes. Motion cut comes as standard. The system warns the operator and sounds an external alarm as the machine nears a limit, then stops the limit being breached.
Yes. Real-time data logging is built in, alongside integrated diagnostics. Series 2 Evo is also telemetry ready, so data can flow into our online Insights Platform.
Choose the Series 2LHS Evo. It adds load monitoring to height and slew control, and is also approved by Network Rail.
Downloads
Download the Series 2 Evo brochure for an overview of the range and its specification.
Other civils products

Combined function · Rail certified
Advanced height, slew and load control with Network Rail approval for high performance working.
View product →
Single function
Height limitation to protect from overhead obstacles or danger.
View product →