Single function · Civils

Series 1S

Easy control of machine slew.

A simple, accurate and cost-effective slew limiter, suitable for self-installation. It is designed to keep people safe and prevent machine damage when working in confined spaces.

Not sure which system you need? Use our System Finder
GKD Series 1S slew limiter control unit

Slew

Single function slew limiter

12 / 24V

Works with 12V or 24V motion cut coils

Self-install

Can be fitted by any competent engineer

IP67

Proximity based slew sensors

How it works

You set the limits. The machine stays inside them.

The operator sets left and right slew limits from the cab. The Series 1S then restricts the machine to working inside that sector.

01 · DETECT

Proximity based slew sensors

The sensors track the machine's slew position. A simple rotational calibration teaches the system the number of teeth on the machine.

02 · SET

Display with key switch

Fitted inside the cab on a mount. The operator sets the left and right slew limits quickly and easily from the operator display unit.

03 · LIMIT

Hydraulic motion cut

When a slew limit is reached, a hydraulic solenoid valve cuts the motion, so the machine cannot move beyond the permitted zone. Slewing back into the safe zone is still allowed.

Where it works

Built for machines working in confined spaces

Machine types

  • Tracked excavators
  • Wheeled excavators
  • Backhoe loaders
  • Piling rigs

Sectors

  • Civils & construction
  • Highways & utilities
  • Demolition
  • Quarrying & aggregates
  • Waste & recycling

Job applications

  • Working alongside live traffic lanes
  • Working close to buildings or boundary walls
  • Working near people on foot
  • Materials handling in confined yards
  • Working next to open excavations

Technical specifications

Series 1S specification

Electrical
Motion cutCompatible with 12V or 24V coils
OutputA hydraulic solenoid valve cuts the left or right slew service. Slew back into the safe zone is still permitted.
Mechanical
Sensor typeProximity based sensors, IP67 rated. A simple rotational calibration learns the number of teeth on the machine
DisplayDisplay with integrated key switch, IP64 rated, RAM mount to window or dashboard
Series 1S slew sensor on the upper structure pivot of a wheeled excavator

Series 1S slew control on an excavator.

Installation

Self-installation ready

The Series 1S can be installed by any competent engineer. If you would rather leave it to us, our engineers and approved partners can fit the system, set it up and show your operators how it works.

01

Fit

Fit the slew sensors, mount the display in the cab and wire the output to the solenoid valves on the slew services, then run the simple rotational calibration.

02

Set the limits

Set the left and right slew limits on the display to create a safe pre-set working zone.

03

Work

When a slew limit is reached, motion is cut so the machine cannot move beyond the permitted zone. Slewing back into the safe zone is still allowed.

04

Maintain

Book an annual inspection with us to keep the system working as it should.

Talk to us about the Series 1S

Tell us about your machines and where they work, and we will help you choose the right system. Call +44 (0) 1202 861961 or send us a message.

Send us a message

Fill in your details and our team will get back to you.

FAQ

Series 1S questions

Can I set different slew limits for each job?

Yes. The operator can set new left and right slew limits from the in-cab display whenever the job changes.

Can the Series 1S create virtual walls?

No. The Series 1S sets a simple left and a right slew limit. For parallel or multipoint virtual walls, choose the Series 2HS Evo or Series 2LHS Evo.

What happens when the machine reaches a slew limit?

A hydraulic solenoid valve cuts the slew service in that direction, so the machine cannot enter the exclusion zone. Slew in the opposite direction, back into the safe zone, is still permitted.

Can I get height and slew control in one system?

Yes. The Series 1HS brings together the Series 1H and Series 1S in one entry-level system. For larger machines, choose the Series 2HS Evo.

Is Series 1S Network Rail approved?

No. For Adjacent Line Open or Overhead Line Equipment work, choose the Series 2HS Evo or Series 2LHS Evo, which are Network Rail approved.

Downloads

Series 1S brochure

Download the Series 1S product brochure for an overview of the system and its specification.

Other civils products

Compare with the rest of the range

Series 1H height limiter system

Single function

Series 1H

Height limitation to protect from overhead obstacles or danger.

View product →
Series 1L load monitor system

Single function

Series 1L

Protection against reaching maximum lift capacity and overloads.

View product →
Series 2HS Evo touchscreen with height and slew limits around an excavator

Combined function · Rail certified

Series 2HS Evo

Advanced height and slew control with Network Rail approval.

View product →