Height, slew and load control

Machine safety and control specialists since 1992.

GKD designs height, slew and load control systems for excavators, road rail vehicles, and other heavy machinery. Our systems stop machines at a safe limit, so operators can work with confidence near people, structures and overhead hazards.

Thousands of systems fitted worldwide. Network Rail approved.

Trusted by contractors, plant hire companies and rail operators

Why it matters

Protecting plant and people on the same site

When plant works close to people, buildings, live traffic or overhead lines, there is little room for error. A safety control system stops the machine at a set limit, so a misjudgement in the cab does not turn into an incident.

4,000+

GKD safety control systems deployed on sites and projects around the world.

126

workers were killed in work-related accidents in Great Britain in 2025/26 (HSE)

25

of those deaths were in construction, more than any other industry (HSE)

Safety Control Solutions

From single function limiters to full machine control

At GKD we've been building safety control systems for nearly 35 years. Whatever the machine, the site or the budget, we have a system to suit - from a simple height limiter to a Network Rail approved system for on-track rail working.

How it works

Monitor, check, warn, stop.

Every GKD system follows the same simple principle. It reads the machine, checks it against the limits you have set, warns the operator as limits are approached, and stops the movement before a limit is crossed.

01

Monitor

Sensors on the boom, slew and hydraulics measure the machine's position and load in real time.

02

Check

The system compares those readings with the safe working limits set by the machine operator.

03

Warn

The in-cab display and alarm warn the operator as the machine approaches a limit.

04

Stop

At the limit, the system cuts the hydraulic movement, so the machine cannot go beyond it.

Sectors

Where our systems work

Construction & Infrastructure

Height, slew and load control for excavators and lorry cranes working near buildings, overhead lines and live roads.

Rail

Network Rail approved systems for road rail vehicles and MEWPs, including ALO working, virtual walls and tandem lifting.

Agriculture & Forestry

Height and slew control for tractors, flails, telehandlers and other farm machinery.

Waste & Recycling

Reliable control for excavators and materials handlers in busy yards and transfer stations.

Oil and Gas Infrastructure

Height limiting for telehandlers and other lifting machines working around plant, pipework and people.

Quarrying & Aggregates

Load and slew control for excavators and lifting machines working around people and fixed plant.

Need proximity warning?

SensorZone, our proximity warning system, alerts both the operator and the pedestrian worker when they get too close to each other. It has its own dedicated website and specialist team, based across Europe and the USA.

Choose SensorZone to keep people and machines apart. Choose a GKD control system to limit what the machine itself can do.

Visit sensorzone.io
SensorZone proximity warning detection zone around a loading shovel, with a worker standing outside the zone

Approvals and track record

Approved, proven and trusted

Our systems meet the strict standards demanded by the UK rail industry and are backed by more than three decades of experience.

RIS 1530

Series 2 and GKD Rail meet Network Rail RIS 1530 Issue 6

75%+

More than 75% of applicable machines registered with Network Rail have a GKD system fitted

EN 15746

GKD Rail complies with EN 15746, the European standard for road rail machines

ALO/OLE

Our rail MEWP system is approved for Adjacent Line Open and Overhead Line Equipment working

Since 1992

Designing safety control systems since 1992, with our first full system fitted in 1994

Get started

Talk to us about your machines

Tell us what machines you run and the environment you're working in. We will recommend the right system, in the UK or overseas.

Send us a message

Fill in your details and our team will get back to you.

Help and advice

Frequently asked questions

How do I get a quote?
Call us on +44 (0) 1202 861961 or send us a message. Tell us about your machines and where they work, and we will recommend the right system and give you a price.
Can your systems be fitted to existing machines?
Yes. Most of our systems are retrofitted to existing fleets. We fit excavators, backhoe loaders, lorry cranes, wheel loaders, telehandlers, MEWPs and road rail vehicles from all the major manufacturers.
Do you offer training?
Yes. We run operator, installation and inspection training for all of our civils and rail systems. Training  can be carried out online or in person at your depot.
Do you install and service the systems?
Yes. Our UK service team handles installation, calibration, annual inspections and repairs, supported by a network of approved installation partners.
Which approvals do your systems have?
Series 2 and GKD Rail are Network Rail approved to RIS 1530 Issue 6, and GKD Rail complies with EN 15746. Our rail MEWP system is approved for ALO and OLE working. Ask us for the approval details for any product.
Do you work outside the UK?
Yes. We supply and support customers around the world, either directly or through our distributors. We have recently sent installation engineers to Europe, North America and the Middle East to fit systems.