Single function · Civils

Series 1L

Accurate and reliable load control.

The Series 1L monitors the load on a machine used for lifting, warns the operator as it approaches maximum lift capacity and cuts motion at the limit. It is ideal for wheel loaders and excavators up to about 7 tonnes.

Not sure which system you need? Use our System Finder
GKD Series 1L load monitoring control unit

Load

Single function load monitor

50 / 75 / 100%

Visual indication of load status

Up to 7t

Excavators up to about 7 tonnes, and wheel loaders

IP67

Angle sensor and pressure transducer

How it works

Know the load before it becomes an overload.

The Series 1L measures boom angle and lift cylinder pressure. It shows the operator the load status, gives an audible warning at 100% of safe lift capacity and cuts motion at the limit.

01 · DETECT

Angle and pressure sensors

An angle sensor on the primary boom and a hydraulic pressure transducer in the boom lift cylinder measure the load on the machine.

02 · INDICATE

LED load status display

The operator sees the load status as it passes 50%, 75% and 100% of the machine's maximum safe lift capacity.

03 · WARN

Warning and motion cut

An audible warning sounds at 100% of safe lift capacity, and the motion cut output stops the lift going any further. It works with 12V or 24V coils.

Where it works

Built for machines used for lifting

Machine types

  • Wheel loaders
  • Excavators up to about 7 tonnes
  • Backhoe loaders
  • Lorry-mounted cranes

Sectors

  • Civils & construction
  • Quarrying & aggregates
  • Waste & recycling
  • Utilities & highways

Job applications

  • Lifting & placing precast concrete elements
  • Lifting pipes into trenches
  • Lifting in waste and recycling yards
  • Lorry crane deliveries
  • Lifts close to maximum reach

Technical specifications

Series 1L specification

Taken from the Series 1L product brochure. If you need more detail for your machine, our team can help.

Electrical
Motion cutCompatible with 12V or 24V coils
WarningsVisual load status at 50%, 75% and 100% of safe lift capacity. Audible warning at 100%
Mechanical
Sensor typesAngle sensor on the primary boom and hydraulic pressure transducer in the boom lift cylinder, IP67 rated
DisplayLED display, IP64 rated, RAM mount to window or dashboard
Series 1L LED capacity indicator during a precast lift on a civils site

Series 1L load monitoring on an excavator.

Compatibility

Fits a wide range of lifting machines

The Series 1L fits to the primary boom and boom lift cylinder. It is ideal for wheel loaders and for excavators up to about 7 tonnes. On larger excavators it is too limiting, so we recommend the Series 2LHS Evo instead.

  • Wheel loaders, excavators up to about 7 tonnes, backhoe loaders and lorry-mounted cranes
  • Pressure transducer measures the hydraulic pressure in the primary boom lift cylinder
  • Need height or slew control? See the Series 1H and Series 1S
  • LED display with visual load status, an audible warning and a 12V or 24V motion cut output
  • For load, height and slew control with Network Rail approval, see the Series 2LHS Evo

Installation

We can fit it for you

Our engineers and approved partners can fit the Series 1L, set it up for your machine and show your operators how it works.

01

Fit

Fit the angle sensor to the primary boom, the pressure transducer to the boom lift cylinder and the display in the cab, then wire the sensors to the display.

02

Set the limit

Set the system up for the machine's maximum safe lift capacity.

03

Work

The display shows load status at 50, 75 and 100%. An audible warning sounds at 100% of safe lift capacity, and the motion cut stops the lift going any further.

04

Maintain

Book an annual inspection with us to keep the system working as it should.

Talk to us about the Series 1L

Tell us about your machines and where they work, and we will help you choose the right system. Call +44 (0) 1202 861961 or send us a message.

Send us a message

Fill in your details and our team will get back to you.

FAQ

Series 1L questions

Is the Series 1L a Rated Capacity Indicator?

The Series 1L is an entry-level load monitor. For a full Rated Capacity Indicator with load, height and slew control, choose the Series 2LHS Evo.

How does the Series 1L measure the load?

An angle sensor on the primary boom and a hydraulic pressure transducer in the boom lift cylinder measure the load moment. The system compares it with the machine's maximum safe lift capacity.

What does the operator see?

A visual indication as the load passes 50%, 75% and 100% of the machine's maximum safe lift capacity, with an audible warning at 100%. At the limit, the motion cut stops the lift.

Which machines is the Series 1L suitable for?

It is ideal for wheel loaders and excavators up to about 7 tonnes, and also suits backhoe loaders and lorry-mounted cranes. It is not suitable for larger excavators, where it would be too limiting. For those, choose the Series 2LHS Evo.

Is the Series 1L Network Rail approved?

No. For lifting near the running line, choose the Series 2LHS Evo, which Network Rail has approved as a high performance movement limiting device.

Downloads

Series 1L brochure

Download the Series 1L product brochure for an overview of the system and its specification.

Other civils products

Compare with the rest of the range

Series 1H height limiter system

Single function

Series 1H

Height limitation to protect from overhead obstacles or danger.

View product →
Series 1S slew control system

Single function

Series 1S

Control of machine slew for operating in confined spaces.

View product →
Series 2LHS Evo advanced load height and slew control system

Combined function · Rail certified

Series 2LHS Evo

Load, height and slew control with Network Rail approval.

View product →