Civils & construction safety

Height, slew and load control for civils plant.

We have been building safety control systems since 1992. From a simple height limiter to full integrated control, we have a system for your machine, your site and your budget.

Not sure which system you need? Use our System Finder
GKD Series 2 height, slew, and load control system fitted to a tracked excavator on a civils site

Trusted by contractors and plant hire companies around the world

The civils range

From simple limiters to total machine control.

Start with a single function limiter, or choose combined height, slew and load control. Check out the systems below to see which one best suits your machine and job.

Series 1H height limiter control unit

Single function

Series 1H

Height limitation to protect from overhead obstacles or danger.

Application Single boom excavators, backhoe loaders, wheel loader bucketsControl axes 1 (height)Cab Push button display with key switchFit GKD engineer or self-installation

View product →
Series 1H+ height restrictor control unit

Single function

Series 1H+

Straightforward height limitation for two and three piece booms.

Application 2 or 3-piece boom machines, tractor flailsControl axes 1 (height)Cab Push button display with key switchFit GKD engineer or self-installation

View product →
Series 1TH telehandler height restrictor control unit

Single function · Telehandlers

Series 1TH

Low cost, entry-level height limiting for telehandlers.

Application TelehandlersControl axes 1 (height)Cab Push button display with key switchFit GKD engineer

View product →
Series 1S slew limiter control unit

Single function

Series 1S

Control of machine slew for operating in confined spaces.

Application Tracked or wheeled excavators, backhoe loaders, piling rigsControl axes 1 (slew)Cab Push button display with key switchFit GKD engineer or self-installation

View product →
Series 1HS height and slew control unit

Combined function

Series 1HS

Combined height and slew control for smaller machines.

Application Tracked or wheeled excavators, backhoe loaders, tractors, lorry loading cranesControl axes 2 (height, slew)Cab Push button display with key switchFit GKD engineer or self-installation

View product →
Series 1L load monitoring control unit

Single function

Series 1L

Protection against reaching maximum lift capacity and overloads.

Application Wheel loaders, excavators up to about 7 tonnes, backhoe loadersControl axes 1 (load)Cab Push button display with key switchFit GKD engineer or self-installation

View product →
Series 2HS Evo display unit

Combined function · Rail certified

Series 2HS Evo

Height and slew control with true proportional control, dig mode and Network Rail approval.

Application Tracked or wheeled excavators, backhoe loadersControl axes 2 (height, slew)Cab Full colour touchscreen displayCertification Network Rail approved, low and high performanceFit GKD engineer or approved installer

View product →
Series 2LHS Evo display unit

Combined function · Rail certified

Series 2LHS Evo

Complete load, height and slew control in one Rated Capacity Indicator.

Application Tracked or wheeled excavators, backhoe loadersControl axes 3 (load, height, slew)Cab Full colour touchscreen displayCertification Network Rail approved, low and high performanceFit GKD engineer or approved installer

View product →

Specification matrix

Comparing our range

A quick look at what each system includes. For full details on any product, talk to our team.

 Series 1HSeries 1SSeries 1HSSeries 1H+Series 2HS EvoSeries 2LHS Evo
Height limiting✓−✓✓✓✓
Slew limiting−✓✓−✓✓
Load monitoring−−−−−✓
Two and three piece booms−−−✓✓✓
Motion cut✓✓✓✓✓✓
Touchscreen display−−−−✓✓
Network Rail approved−−−−✓✓
Suitable for self-installation✓✓✓✓−−

Why fit a safety control system

Stop the machine before it reaches a hazard.

A safety control system gives each machine a safe working limit. It warns the operator as the machine approaches the limit, then stops the movement at the limit.

Overhead hazards and tight spaces

Power lines, bridges, live roads and confined spaces. Places where one wrong boom movement can cause an incident.

More than operator training

Training matters, but people misjudge heights and distances. A safety control system limits what the machine itself can do.

Suitable for mixed and ageing fleets

Most of our systems are retrofitted to existing machines from all the major manufacturers. Fit one excavator or a whole fleet.

Talk to us about your requirements

Tell us what machines you run and the environment you're working in.
Call +44 (0) 1202 861961 or send us a message below.

Send us a message

Fill in your details and our team will get back to you.