Height control · Network Rail approved

Series 2H Evo

Advanced height control with Network Rail approval.

A height monitoring system for excavators, backhoe loaders and other articulated boom machines. It is built on the same Series 2 Evo platform as the Series 2HS Evo, with height control only, and is approved by Network Rail.

Series 2H Evo display unit

Height

Monitored and controlled by one system

True proportional

A completely smooth stop at the pre-set limit

Network Rail

Approved for height control on the railway

Touchscreen

Full colour graphical display

New for 2025

Smoother stops. Better data.

The Series 2 Evo upgrade, launched in September 2025, adds a powerful new set of features as standard.

NEW · CONTROL

True proportional control

A first for the UK civils market. Advanced software brings the machine to a completely smooth stop at the pre-set limit, rather than a step down or on/off valve set up.

NEW · DATA

Telemetry ready

Series 2 Evo connects to our online Insights Platform for real-time data on machine utilisation, operator behaviour and key safety events.

NEW · LIFTING

Lifting as well?

The Series 2LHS Evo adds load control, with multiple lift duties around the machine and a new Crane Mode that reduces load swing.

How it works

Warn first. Stop at the limit.

The Series 2H Evo uses high accuracy sensors and GKD safety software to track the height of the machine. It warns the operator as the machine nears a set limit, and the motion cut stops the limit being breached.

01 · SENSE

Height sensors

Dedicated sensors track tool height and radius. Dig mode adds dig depth indication for work below ground.

02 · ALERT

Touchscreen and external alarm

A full colour touchscreen shows the limits set and where the machine is. The operator is warned as the machine approaches a limit. An external audio alarm sounds when the limit is reached.

03 · LIMIT

Intelligent motion cut

The intelligent motion cut comes as standard and prevents limits being breached. True proportional control brings the machine to a completely smooth stop at the limit. A remote hydraulic shut-off and a steering lock are also available.

Where it works

Built for work beside the railway and under overhead hazards

Machine types

  • Tracked excavators
  • Wheeled excavators
  • Backhoe loaders
  • Other articulated boom machines

Sectors

  • Rail
  • Construction
  • Energy
  • Forestry and mining

Typical work

  • Working under power lines, bridges and other overhead hazards
  • Digging, with dig depth indication

Technical specifications

Series 2H Evo specification

Based on the Series 2 Evo platform. If you need more detail for your machine, our team can help.

Control
Motion cutIntelligent motion cut as standard
Proportional controlTrue proportional control as standard, for a completely smooth stop at the pre-set limit
LimitsHeight limits, dialled in or set manually
OutputsExternal audio alarm at the limit. Remote hydraulic shut-off and steering lock available
Data loggingReal-time data logging
TelemetryTelemetry ready, with data sent to our online Insights Platform
Display
Type14.5cm full colour touch screen, IP67 rated
ShowsTool height and radius, limits set and motion cuts applied
Functions
Dig modeDig mode with dig depth indication
DiagnosticsIntegrated diagnostics
Certification
Network RailApproved for height control

Compatibility

Fits a wide range of machines

The Series 2H Evo is a complete system, with its own sensors and touchscreen display. It suits tracked and wheeled machines with an articulated boom.

  • Tracked or wheeled excavators, backhoe loaders and other articulated boom machines
  • Multiple boom configurations, including multi-section, swing and offset
  • Intelligent motion cut as standard
  • Remote hydraulic shut-off and steering lock available
  • Real-time data logging with integrated diagnostics
  • Need slew or load control as well? See the Series 2HS Evo or Series 2LHS Evo

Installation and support

Fitted, set up and supported

Our engineers and approved partners fit the Series 2H Evo, set it up and show your operators how it works. Support does not stop at the install.

01

Fit

The sensors, touchscreen and motion cut are fitted to the machine, along with a shut-off or steering lock if you choose them.

02

Set up

The system is calibrated to the machine and the height limits are set.

03

Train

Operators are shown how to set limits, use dig mode and read the display.

04

Inspect

Book an annual inspection with us to keep the system working as it should.

Talk to us about the Series 2H Evo

Tell us about your machines and where they work, and we will help you choose the right system. Call +44 (0) 1202 861961 or send us a message.

Send us a message

Fill in your details and our team will get back to you.

FAQ

Series 2H Evo questions

What is the difference between the Series 2H Evo and Series 2HS Evo?

The Series 2H Evo controls height only. The Series 2HS Evo adds slew control, and the Series 2LHS Evo adds load monitoring as well.

Is the Series 2H Evo Network Rail approved?

Yes. The Series 2H Evo is approved by Network Rail. If you also need slew control for rail work, choose the Series 2HS Evo.

Is motion cut included?

Yes. Motion cut comes as standard. The system warns the operator and sounds an external alarm as the machine nears a limit, then stops the limit being breached.

Does the Series 2H Evo log data?

Yes. Real-time data logging is built in, alongside integrated diagnostics. Series 2 Evo is also telemetry ready, so data can flow into our online Insights Platform.

What if I need load control too?

Choose the Series 2LHS Evo. It adds load monitoring to height and slew control.

Downloads

Series 2 Evo brochure

Download the Series 2 Evo brochure for an overview of the range and its specification.

Other civils products

Compare with the rest of the range

Series 2LHS Evo display unit

Combined function · Rail certified

Series 2LHS Evo

Advanced height, slew and load control. Network Rail approved for height and slew.

View product →
Series 1H height limiter control unit

Single function

Series 1H

Height limitation to protect from overhead obstacles or danger.

View product →
Series 2HS Evo display unit

Combined function · Rail certified

Series 2HS Evo

Height and slew control with true proportional control, dig mode and Network Rail approval.

View product →